The WPS PIN on an HP printer is most often printed on a label on the back or bottom of the unit, typically near the serial number and barcode. If the label is worn or absent, the PIN can usually be retrieved from the printer's control panel under Network or Wireless settings, or from the router's WPS client list.

That dual location — physical label versus firmware menu — explains most of the confusion around this task. The PIN is not a password you set. It is an eight-digit credential the printer generates and stores, and HP exposes it in two places depending on whether the model has a touchscreen, a segmented LCD, or no display at all. Finding it takes under two minutes once you know which class of printer you own.

How WPS and the PIN actually work

Wi-Fi Protected Setup is a certification program, not a security standard in its own right. The Wi-Fi Alliance introduced it in 2007 to remove the friction of typing a long passphrase into a device with no keyboard. It defines several pairing methods, and the PIN method is the one that trips people up.

In PIN mode, the printer acts as the enrollee. It generates or is assigned an eight-digit numeric credential. The router — the registrar — accepts that credential and hands over the network's actual encryption keys. The printer never needs the Wi-Fi password typed into it. That is the entire appeal, and also the entire weakness.

The eight digits are not eight independent digits. The protocol computes the final digit as a checksum of the first seven, and the registrar validates the first four and second four as separate halves. An attacker who can reach the WPS endpoint can therefore brute-force the PIN in roughly 11,000 attempts rather than 100 million. Researchers documented this weakness in 2011, and it is why many routers now disable WPS PIN mode by default or rate-limit attempts.

For a home user, the practical consequence is simple. The PIN is a convenience credential, not a secret worth protecting like a password. HP still prints it because the method remains the fastest way to attach a displayless printer to a network.

Plain-language version: the PIN is a short handshake code, not your Wi-Fi password, and it is meant to be readable off the hardware.

Where the label sits, by printer class

HP does not use one label layout across its range. The PIN location correlates with form factor and production era more than with model name.

On LaserJet and OfficeJet Pro units, the label is usually on the rear panel, left of the USB port, or on the bottom near the paper tray edge. On DeskJet and Envy models, it is frequently on the underside, sometimes behind a hinged access door covering the ink cartridge bay. On portable and travel printers, the label is often inside the paper feed cover.

The label itself is dense. You will typically see the model number, serial number, a barcode, MAC address, and — on WPS-capable wireless models — a line reading WPS PIN followed by eight digits, sometimes hyphenated as four and four. If you see only a serial number and no PIN line, the unit may predate WPS or may not have wireless hardware at all.

Two red flags when reading the label:

A PIN line with fewer than eight digits is a product or admin code, not a WPS PIN. Do not enter it into a router's WPS field. A label that has been relabeled or overprinted with a service sticker may carry a stale PIN that no longer matches firmware. Verify in the menu before trusting it.

If the label is unreadable, do not guess. Move to the menu path.

Printers with a color touchscreen expose the PIN through the networking menu, and the path varies by firmware generation. The following comparison covers the paths you will actually encounter.

Printer interface Menu path to WPS PIN Typical models Notes
Color touchscreen, current firmware Settings > Network > Wireless > Wi-Fi Protected Setup > PIN OfficeJet Pro, Envy Inspire, LaserJet Pro with touch panel PIN displayed on screen; may require pressing OK to reveal
Color touchscreen, older firmware Network > Wireless Setup Wizard > WPS > PIN Older Envy and OfficeJet Wizard may auto-start a search before showing PIN
Segmented LCD with arrows Setup > Network > Wireless > WPS > PIN DeskJet 2700/3700/4100 series Two-line display; navigate with arrows, confirm with OK
LCD with dedicated Wireless button Press and hold Wireless until light blinks, then print network config page DeskJet 2600 and similar PIN appears on the printed configuration page, not the screen
No display No menu; PIN only on label or printed config page Entry LaserJet, some DeskJet Hold Wireless and Resume buttons together to print config page

The counterintuitive detail: on several DeskJet models, the PIN is not shown on the screen at all. The menu offers a WPS option, but selecting it launches push-button pairing and prints the PIN to a configuration page instead. Users who keep tapping the screen waiting for digits are looking in the wrong medium.

A printed network configuration page is the most reliable single artifact. It lists the network name, the printer's IP address, the MAC address, and the WPS PIN together, and it survives a factory reset better than memory does.

The router side and the two-minute window

WPS is a timed handshake. When you trigger PIN mode on the router, the registrar opens a window — commonly 120 seconds, though some routers use 60 or 180. The printer must present its PIN inside that window. Miss it and the process silently fails with no error on the printer.

This timing mismatch causes more failed setups than any other factor. The correct sequence is to start the printer's WPS PIN entry first, then trigger the router's WPS page, then submit the PIN. Reversing the order wastes the window while you navigate printer menus.

Some routers also list currently associated WPS clients in their admin interface, showing the PIN each enrollee used. If your router offers this — it appears under Wireless > WPS > Client List on many models — you can read the printer's PIN without touching the printer. This is the single fastest path when the printer is in another room.

Be aware that mesh systems and ISP-provided gateways frequently hide or remove WPS entirely. If the WPS section is missing from the admin panel, the PIN is irrelevant to that network and you will need the standard passphrase method instead.

Misconceptions that cost people time

The most common error is treating the WPS PIN as the Wi-Fi password. They are different credentials with different lengths and different functions. Entering the PIN into a device's Wi-Fi password field will fail every time.

A second error is assuming the PIN is permanent. On most HP models it is stable across reboots, but a factory reset or a firmware reflash can regenerate it. If a PIN that worked last year now fails, the label may be stale and the menu is authoritative.

A third misconception concerns the physical WPS button. Many users press the button on the router, see the printer's wireless light blink, and assume pairing completed. Push-button pairing and PIN pairing are separate methods. Pressing the button does not reveal the PIN, and the PIN does not work through push-button mode.

Finally, there is a security assumption worth correcting. People often ask whether the PIN should be kept secret. It should not be treated as sensitive. It grants temporary network access to a device physically present, and the protocol's design weakness means it was never a strong secret. The Wi-Fi passphrase is the credential that matters.

Timeline of a typical WPS PIN pairing:

Elapsed time What happens What you should see
0 s Printer enters PIN mode Wireless light blinks or screen shows PIN entry
5-15 s Router WPS page opened, PIN submitted Router interface shows "connecting"
15-45 s Registrar validates PIN halves and checksum No visible change on printer
45-90 s Encryption keys exchanged Wireless light turns solid
90-120 s DHCP lease requested Printer prints or displays IP address
120 s+ Window closes if unpaired Silent failure; restart both sides

If you reach 120 seconds with a blinking light, the handshake did not complete. Restart the sequence rather than waiting.

Practical steps, in order

Work through these in sequence. Most people resolve the question at step two.

Turn the printer around and photograph the rear and bottom labels before reading them. The PIN line is small and often beside the barcode. If no PIN line exists, print a network configuration page. On displayless models, hold the Wireless and Resume buttons for about three seconds. On touchscreen models, navigate Settings > Network > Wireless > Wi-Fi Protected Setup > PIN and read the eight digits. Check the router admin panel under Wireless > WPS > Client List for the enrolled PIN. If all three fail, the printer likely lacks WPS support and requires the standard passphrase method.

Set a hard threshold: if you have spent more than ten minutes across these steps, stop hunting for the PIN and connect the printer using the Wi-Fi Setup Wizard with the network passphrase. The wizard achieves the same result and does not depend on a credential you cannot locate.

One more threshold worth knowing. If your router's WPS window is 60 seconds rather than 120, prepare the PIN on screen before triggering the router. Reading eight digits off a label takes longer than you think when the clock is running.

Limits and what the PIN cannot do

The PIN cannot join a network that has WPS disabled, and an increasing number of routers ship with PIN mode off by default for the security reasons above. It cannot cross a network that uses enterprise authentication, such as WPA2-Enterprise or 802.1X, because those require identity credentials rather than a shared key. It also cannot help if the printer's wireless radio has failed or if the unit is 5 GHz-only and the router's WPS operates on 2.4 GHz alone.

Model coverage is another real limit. HP has shipped wireless printers without WPS support, and entry-level USB-only units have no PIN at all. A missing PIN line on an otherwise intact label is meaningful evidence, not a printing defect.

Finally, the printed configuration page is authoritative only until the next reset. After a factory reset, reprint it. After a router change, reprint it again. The label never updates; the page always does.

This article is general educational information about printer configuration, not a security audit or a guarantee of network compatibility. For networks handling sensitive data, consult a qualified network administrator before enabling WPS PIN mode, and prefer the standard passphrase method where convenience is not the deciding factor.